Duratrac HB Epoxy
CCS Duratrac HB Epoxy is a high solid, two-component crystal clear, high gloss and high-performance trade strength floor coating system suitable for residential, industrial and commercial use. It is a trade strength epoxy roller coating suitable for all flooring applications where an economical yet robust and long-lasting coating is required. CCS Duratrac HB Epoxy can be tinted with CCS compatible tints.
- Extremely durable and long-lasting
- Low maintenance
- Clear, high gloss finish (can be tinted)
- Excellent self-levelling properties
- Ideal for internal use
Apply CCS Duratrac HB Epoxy with a lambswool applicator or mohair
roller. If required use a spiked roller to remove any air bubbles.
First Coat
Apply CCS Duratrac HB Epoxy at a rate of 4-5m2 per litre. If a
textured or anti-slip surface is required apply CCS Duratrac HB
Epoxy at 4m2 per litre and then apply an appropriate anti slip medium
such as CCS Slip Reduction Granules.
Allow 8 hours drying then remove excess anti-slip with
broom or vacuum. Ensure that all dust and any other
contamination is removed thoroughly.
Second Coat
Apply second coat inside recoat window (8-24 hours). After 24 hours
the floor may no longer accept a second coat without the possibility
of fish-eyeing and subsequent delamination. If applying a second coat
outside of the recommended recoat window time sanding of the
surface will be required to ensure proper inter-coat adhesion.
Mix and Apply CCS Duratrac HB Epoxy uniformly at a rate of 4-5m2
per using clean bucket and mixer.
Allow 24 hours cure time before subjection to pedestrian trac, 72
hours for vehicular trac and 5-7 days before subjecting to chemicals
or severe abrasion
Download the full product data sheet for detailed technical information, safety data, and application guidelines.
Download Data Sheet (PDF)- Extremely durable and long-lasting
- Low maintenance
- Clear, high gloss finish (can be tinted)
- Excellent self-levelling properties
- Ideal for internal use
Apply CCS Duratrac HB Epoxy with a lambswool applicator or mohair
roller. If required use a spiked roller to remove any air bubbles.
First Coat
Apply CCS Duratrac HB Epoxy at a rate of 4-5m2 per litre. If a
textured or anti-slip surface is required apply CCS Duratrac HB
Epoxy at 4m2 per litre and then apply an appropriate anti slip medium
such as CCS Slip Reduction Granules.
Allow 8 hours drying then remove excess anti-slip with
broom or vacuum. Ensure that all dust and any other
contamination is removed thoroughly.
Second Coat
Apply second coat inside recoat window (8-24 hours). After 24 hours
the floor may no longer accept a second coat without the possibility
of fish-eyeing and subsequent delamination. If applying a second coat
outside of the recommended recoat window time sanding of the
surface will be required to ensure proper inter-coat adhesion.
Mix and Apply CCS Duratrac HB Epoxy uniformly at a rate of 4-5m2
per using clean bucket and mixer.
Allow 24 hours cure time before subjection to pedestrian trac, 72
hours for vehicular trac and 5-7 days before subjecting to chemicals
or severe abrasion
Download the full product data sheet.
Download PDF
