Micro Seal
A clear solvent-based penetrating sealer that protects polished porcelain, natural stone, marble and granite from moisture and staining without changing the look of the surface.
- Delivers long-lasting defence — years of reliable surface protection
- Fast-acting formula — repels water within 2–4 hours
- Protects against moisture and helps reduce staining
- Will not darken or yellow over time
- Can be recoated at any time without stripping
Surface PreparationEnsure the surface is thoroughly clean, dry, and free from dirt, grease, wax, and any previous coatings. For best results on natural stone, allow newly laid surfaces to cure fully before sealing.Application Method1Apply Micro Seal liberally using a lambswool applicator, low-pressure sprayer, or clean lint-free cloth.2Work in manageable sections, ensuring even coverage across the entire surface. Avoid pooling in joints or low spots.3Allow 5–10 minutes for the sealer to penetrate into the substrate.4Wipe off any excess product with a clean, dry cloth before it dries on the surface.5Allow 2–4 hours before exposing to water. Full cure is typically achieved within 24 hours.Suitable SurfacesPolished porcelain tilesMarble benchtops and floorsGranite countertops and surfacesStoneware installationsUnpolished natural stone featuresCoverage Rate20–30 m² per litre depending on surface porosity and texture.Pro Tip: Always conduct a small test patch in an inconspicuous area first to confirm compatibility and desired finish before full application.
| Coverage Rate | 20–30 m²/litre |
| Packaging | Contact CRC for available sizes |
Download the full product data sheet for detailed technical information, safety data, and application guidelines.
Download Data Sheet (PDF)- Delivers long-lasting defence — years of reliable surface protection
- Fast-acting formula — repels water within 2–4 hours
- Protects against moisture and helps reduce staining
- Will not darken or yellow over time
- Can be recoated at any time without stripping
Surface PreparationEnsure the surface is thoroughly clean, dry, and free from dirt, grease, wax, and any previous coatings. For best results on natural stone, allow newly laid surfaces to cure fully before sealing.Application Method1Apply Micro Seal liberally using a lambswool applicator, low-pressure sprayer, or clean lint-free cloth.2Work in manageable sections, ensuring even coverage across the entire surface. Avoid pooling in joints or low spots.3Allow 5–10 minutes for the sealer to penetrate into the substrate.4Wipe off any excess product with a clean, dry cloth before it dries on the surface.5Allow 2–4 hours before exposing to water. Full cure is typically achieved within 24 hours.Suitable SurfacesPolished porcelain tilesMarble benchtops and floorsGranite countertops and surfacesStoneware installationsUnpolished natural stone featuresCoverage Rate20–30 m² per litre depending on surface porosity and texture.Pro Tip: Always conduct a small test patch in an inconspicuous area first to confirm compatibility and desired finish before full application.
| Coverage Rate | 20–30 m²/litre |
| Packaging | Contact CRC for available sizes |
Download the full product data sheet.
Download PDF
