Reinforced Screed
A premixed, fast setting, cement based, resin modified screed. Blended with alkali resistant glass fibres and hard wearing aggregates to make a hardwearing impact, crack and chemical resistant floor and wall repair compound.
- Strong, durable, crack resistant
- Can be feather edged
- Aggregate can be added when using over 5 mm thick
- Water resistant
- Fast setting allows use within 6 hours of application
- Chemical resistant – from pH4 to 12
- Temperature resistant – from –100° to 1,200°C
- Wear resistant – three times harder than concrete
Pour the mixed screed on to the prepared floor
and with a steel trowel at a sharp angle, force
the mixture into the original concrete, then
holding the trowel normally, flat spread the
material to the desired finish in one application.
Apply the screed when the temperature range
is 5°-30°C and do not apply in direct sunlight
or in hot weather conditions
Download the full product data sheet for detailed technical information, safety data, and application guidelines.
Download Data Sheet (PDF)- Strong, durable, crack resistant
- Can be feather edged
- Aggregate can be added when using over 5 mm thick
- Water resistant
- Fast setting allows use within 6 hours of application
- Chemical resistant – from pH4 to 12
- Temperature resistant – from –100° to 1,200°C
- Wear resistant – three times harder than concrete
Pour the mixed screed on to the prepared floor
and with a steel trowel at a sharp angle, force
the mixture into the original concrete, then
holding the trowel normally, flat spread the
material to the desired finish in one application.
Apply the screed when the temperature range
is 5°-30°C and do not apply in direct sunlight
or in hot weather conditions
Download the full product data sheet.
Download PDF
